The exhaust system is an essential component of any motorcycle. It’s responsible for routing exhaust gases away from the engine and can greatly impact the performance and sound of the bike. If you’re a Honda XR650L motorcycle owner, you might be wondering about the best exhaust systems for your bike. In this article, we’ll explore the best exhaust systems for XR650L motorcycles.
Top rated XR650L Exhausts on Amazon
- Fits Honda XR 600 (85-00) XR 650L (93-17)
- Hard Anodized oval Shaped aluminum Muffler
- TIG welded reinforced Muffler bracket
- 304 Stainless Steel mid pipe/head pipe
- Red powder coated Stainless Steel end tip
- RS-2 Slip-On Muffler
- RST Dual Sport Slip-On Muffler
- The Tusk Top Rack is machine specific for a perfect fit and simple installation. Made from tough powder-coated aluminum and features a multi-point mounting system
- Multiple slot pairs allow you to secure virtually any small load. Rack mounting hardware included
- This kit includes Sub frame Supports to add strength to the OEM XR650L Sub frame
- The Sub frame supports are constructed from 1/4” gusseted steel that is powder coated black for corrosion resistance. Sub frame supports work with the OEM, FMF, and Yoshimura exhausts
- Fits: Honda 1993-2021 XR650L
- FITMENT - This dirt bike foot pegs fit for XR650L 92-22 XR650R 00-07 CR80R/RB 96-02 CR85R/RB 03-07 CRM250 89-98 XR250R/400R 96-04 XR600R 89-00 CRF1000L/DTC 16-22.
- ALUMINUM ALLOY MATERIAL - It is made of T7 7075 aluminum alloy through CNC. It is one of the highest strength alloys, which will not rust and corrode, and is not easy to break and wear. The unique "Y" bridge structure s the strength and stability of the pedal, making it the strongest motorcycle foot pegs on the market.
- WIDER AND BIGGER - It is wider and larger than the original dirt bike foot pegs to provide better friction and control, allowing your feet to stay in place without sliding; the wider platform disperses the impact and reduces the pressure on your feet.
- 17 TEETH - There are 17 teeth on the pedals, which can greatly the friction, so that you will not slip off on the rainy and muddy roads, and you can ride with confidence in any situation. The teeth can also be replaced.
- ANODIZED SURFACE - The bright colors and anodized surface can decorate your motorcycle very well, and it is your first choice for upgrading or replacing dirt bike foot pegs.
- Economically priced high quality slip-on exhaust system
- Attractive design decorated you bike into good looking
- ❤ Attractive design decorated you bike into good looking
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- Sound Muffling Function: This exhaust rubber plug is designed to reduce the noise level of the equipment exhaust system, providing a quieter environment by absorbing and reducing the noise generated when the exhaust gas flows out.
- Rubber Material: The exhaust rubber plug is made of high-quality rubber material, which has good wear resistance and can withstand working conditions in high temperature and high pressure environments.
- Safety: The words "REMOVE BEFORE FLIGHT" are printed on the streamer to remind operators to remove the rubber plug before driving to avoid accidents. This design ensures the normal operation of the exhaust system and driving safety.
- Easy to Install and Disassemble: The exhaust rubber plug has a simple installation and disassemble process for easy maintenance and replacement. Strict testing and quality control ensure that its performance is stable and reliable and can be used for a long time under various working conditions.
- Packing List: You will receive two car muffler cleaning rubber sealing plugs with "REMOVE BEFORE FLIGHT" red ribbon. You can buy with confidence. If you have any product questions, please leave us a message and we will help you.
- High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket
- Order Includes: 1 x Muffler Gasket
- Compatible with Honda models: VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / CX500C CX-500C Custom 1979-1982 / GL1200A Goldwing Aspencade 1986 / GL1200I Goldwing Interstate 1986 / GL1200L Goldwing Limited 1985 / GL1200SEI Goldwing SEI 1986 / GL1500 Goldwing 1500 1988-1989
- Parts Numbers: 18392-MJ4-670 / 18392-449-000
- We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.
- Visit the Largest Selection of Powersports & Mowers Aftermarket Parts Online on the Caltric Amazon store - www.amazon.com /caltric
Affiliate links / Images from Amazon Product Advertising API
FMF Powercore 4
The FMF Powercore 4 is a popular exhaust system for the Honda XR650L motorcycle. It’s made from high-quality materials and features a lightweight design that can improve the bike’s overall performance. The Powercore 4 also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.
Yoshimura RS-2
The Yoshimura RS-2 is another popular exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a cone-shaped end cap that can improve the bike’s overall performance. The RS-2 also has a unique sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.
Pro Circuit T-4
The Pro Circuit T-4 is a high-performance exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a lightweight design that can improve the bike’s overall performance. The T-4 also has a unique sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.
DG R-Series
The DG R-Series is a budget-friendly exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a lightweight design that can improve the bike’s overall performance. The R-Series also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or black finish, and comes with a spark arrestor for off-road use.
Lexx MXe Slip-On
The Lexx MXe Slip-On is a versatile exhaust system for the Honda XR650L motorcycle. It’s made from high-quality materials and features a lightweight design that can improve the bike’s overall performance. The MXe Slip-On also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or aluminum, and comes with a spark arrestor for off-road use.
What to look for in a good XR650L exhaust
Sound
Individual riders prefer various levels of sound for their exhaust system, and finding the right balance of sound and performance is key. Riders who want to remain courteous to those in the area tend to opt for a quieter exhaust system, while high-performance drivers may choose a louder system.
Consider local noise ordinances prior to selecting an exhaust system. Also, think about how you want your vehicle’s sound to affect passengers as you drive by and ask yourself if you would like it loud or barely perceptible. It accounts for half the enjoyment of competing – having people turn heads at your roar whilst staying legal with your local laws.
Performance
When selecting an exhaust system for your xr650l, there are a few important factors to consider. Performance is one of the most important considerations to make when choosing an exhaust. Exhaust systems increase engine output by reducing back pressure, allowing the gases in the cylinders to escape faster and with more force. This increases overall power and torque, improves fuel economy, and extends engine life.
Additionally, performance exhausts often result in a distinctive sound that amplifies the machine’s power and provides a unique experience when operating. Consider choosing an exhaust system that has been tested and proven by other riders as they often provide better performance than generic “universal fit” systems.
Durability
Durability is one of the most important factors when considering an exhaust system. A durable exhaust will last longer and provide better protection in off-road conditions. The material used is a major factor in the longevity of an exhaust system, and materials such as stainless steel or titanium are highly recommended. Therefore, it is important to check the materials and design of an exhaust system before making a purchase.
In addition to the materials used, the design can also play an important role in its durability. High-performance air systems tend to have smaller diameter pipes because this increases their internal velocity and helps reduce back pressure from the engine exhaust gases. However, these small diameter pipes can be easily bent or damaged during use in off-road conditions, so good construction should be taken into account when choosing an exhaust system for these purposes. Additionally, some designs may offer additional features such as heat shields or noise insulation that further increase durability and long-term performance of the system.
Weight
When choosing the best exhaust system for your XR650L, one of the primary factors to consider is weight. Many aftermarket exhaust systems are made of high-performance lightweight materials that allow for increased performance and better porting. Some materials are more expensive than others, but can perform better and last longer.
Additionally, some exhaust systems come with a different weight configuration – such as a lighter or heavier muffler – that can affect how much power you’re getting from your bike. It’s important to understand the weight difference between different models so you can make an informed decision about which is the best exhaust system for your XR650L.
Cost
The cost of an exhaust system is an important factor to consider when buying. As a general rule, prices range from around $100 to over $1000, depending on the make and quality of the exhaust system. Higher-end systems may offer improved performance, louder sound and greater durability, but they are also typically more expensive.
It is important to research the different options and read reviews to determine which model is best for your particular bike. When making your decision, strike a balance between quality and price. Consider how often you plan on using the exhaust system and if you have any special requirements, such as emission requirements or fuel economy demands.
Budgeting for an expensive exhaust system can be difficult, but doing thorough research beforehand can ensure that you get the best value for what you pay for.
Popular XR650L Exhaust Systems
- Fits Honda XR 600 (85-00) XR 650L (93-17)
- Hard Anodized oval Shaped aluminum Muffler
- TIG welded reinforced Muffler bracket
- 304 Stainless Steel mid pipe/head pipe
- Red powder coated Stainless Steel end tip
- RS-2 Slip-On Muffler
- RST Dual Sport Slip-On Muffler
- The Tusk Top Rack is machine specific for a perfect fit and simple installation. Made from tough powder-coated aluminum and features a multi-point mounting system
- Multiple slot pairs allow you to secure virtually any small load. Rack mounting hardware included
- This kit includes Sub frame Supports to add strength to the OEM XR650L Sub frame
- The Sub frame supports are constructed from 1/4” gusseted steel that is powder coated black for corrosion resistance. Sub frame supports work with the OEM, FMF, and Yoshimura exhausts
- Fits: Honda 1993-2021 XR650L
- FITMENT - This dirt bike foot pegs fit for XR650L 92-22 XR650R 00-07 CR80R/RB 96-02 CR85R/RB 03-07 CRM250 89-98 XR250R/400R 96-04 XR600R 89-00 CRF1000L/DTC 16-22.
- ALUMINUM ALLOY MATERIAL - It is made of T7 7075 aluminum alloy through CNC. It is one of the highest strength alloys, which will not rust and corrode, and is not easy to break and wear. The unique "Y" bridge structure s the strength and stability of the pedal, making it the strongest motorcycle foot pegs on the market.
- WIDER AND BIGGER - It is wider and larger than the original dirt bike foot pegs to provide better friction and control, allowing your feet to stay in place without sliding; the wider platform disperses the impact and reduces the pressure on your feet.
- 17 TEETH - There are 17 teeth on the pedals, which can greatly the friction, so that you will not slip off on the rainy and muddy roads, and you can ride with confidence in any situation. The teeth can also be replaced.
- ANODIZED SURFACE - The bright colors and anodized surface can decorate your motorcycle very well, and it is your first choice for upgrading or replacing dirt bike foot pegs.
- Economically priced high quality slip-on exhaust system
- Attractive design decorated you bike into good looking
- ❤ Attractive design decorated you bike into good looking
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- Sound Muffling Function: This exhaust rubber plug is designed to reduce the noise level of the equipment exhaust system, providing a quieter environment by absorbing and reducing the noise generated when the exhaust gas flows out.
- Rubber Material: The exhaust rubber plug is made of high-quality rubber material, which has good wear resistance and can withstand working conditions in high temperature and high pressure environments.
- Safety: The words "REMOVE BEFORE FLIGHT" are printed on the streamer to remind operators to remove the rubber plug before driving to avoid accidents. This design ensures the normal operation of the exhaust system and driving safety.
- Easy to Install and Disassemble: The exhaust rubber plug has a simple installation and disassemble process for easy maintenance and replacement. Strict testing and quality control ensure that its performance is stable and reliable and can be used for a long time under various working conditions.
- Packing List: You will receive two car muffler cleaning rubber sealing plugs with "REMOVE BEFORE FLIGHT" red ribbon. You can buy with confidence. If you have any product questions, please leave us a message and we will help you.
- High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket
- Order Includes: 1 x Muffler Gasket
- Compatible with Honda models: VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / CX500C CX-500C Custom 1979-1982 / GL1200A Goldwing Aspencade 1986 / GL1200I Goldwing Interstate 1986 / GL1200L Goldwing Limited 1985 / GL1200SEI Goldwing SEI 1986 / GL1500 Goldwing 1500 1988-1989
- Parts Numbers: 18392-MJ4-670 / 18392-449-000
- We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.
- Visit the Largest Selection of Powersports & Mowers Aftermarket Parts Online on the Caltric Amazon store - www.amazon.com /caltric
Affiliate links / Images from Amazon Product Advertising API
When it comes to finding the best exhaust system for a XR650L, there are several options for riders to choose from. Each one offers a different level of performance, sound and looks.
There are many exhaust systems available for the Honda XR650L motorcycle, and choosing the right one can greatly impact the bike’s performance and sound. The FMF Powercore 4, Yoshimura RS-2, Pro Circuit T-4, DG R-Series, and Lexx MXe Slip-On are all popular options among XR650L owners. Whether you’re looking for a high-performance exhaust system or a budget-friendly option, there’s an exhaust system out there that can meet your needs. Just make sure to research and consult with a professional before making any changes to your bike.
