Best Exhaust System for XR650L

best exhaust system for xr650
Photo courtesy denipet via flickr. Used under a CC BY 2.0 license.

The exhaust system is an essential component of any motorcycle. It’s responsible for routing exhaust gases away from the engine and can greatly impact the performance and sound of the bike. If you’re a Honda XR650L motorcycle owner, you might be wondering about the best exhaust systems for your bike. In this article, we’ll explore the best exhaust systems for XR650L motorcycles.

Top rated XR650L Exhausts on Amazon

SaleBestseller No. 1
Bestseller No. 2
Big Gun Exhaust/EVO R Series Full System/Compatible with Honda XR 600 (85-00) XR 650L (93-24)/ 09-1613
  • Hard anodized oval shaped aluminum muffler
  • TIG welded reinforced muffler bracket(s)
  • 304 stainless steel mid pipe / head pipe
  • Red powder coated stainless steel end tip
  • Lighter than stock exhaust system
SaleBestseller No. 3
Big Gun Exhaust 09-1612 Exhaust Pipe EVO R Slip On,1 Pack
  • Fits Honda XR 600 (85-00) XR 650L (93-17)
  • Hard Anodized oval Shaped aluminum Muffler
  • TIG welded reinforced Muffler bracket
  • 304 Stainless Steel mid pipe/head pipe
  • Red powder coated Stainless Steel end tip
Bestseller No. 4
Bestseller No. 5
SaleBestseller No. 6
Bestseller No. 7
Bestseller No. 8
Big Gun Exhaust EVO U Series Exhaust System
  • High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket
Bestseller No. 9
DG PERFORMANCE 051-4130 Sport Series Slip-On Exhaust
  • Designed for maximum torque and power across torque curve
  • Features a durable 16 gauge steel body with a lightweight aluminum rear end cap
  • Includes U.S.F.S. approved, removable screen-type spark arrestor; replacement spark arrestor sold separately
  • Bolts on to stock head pipe in minutes
Bestseller No. 10
Caltric Muffler Pipe Gasket Compatible with Honda Xr650L Xr-650L 1995-2009
  • Order Includes: 1 x Muffler Gasket
  • Compatible with Honda models: VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / CX500C CX-500C Custom 1979-1982 / GL1200A Goldwing Aspencade 1986 / GL1200I Goldwing Interstate 1986 / GL1200L Goldwing Limited 1985 / GL1200SEI Goldwing SEI 1986 / GL1500 Goldwing 1500 1988-1989
  • Parts Numbers: 18392-MJ4-670 / 18392-449-000
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.
  • Visit the Largest Selection of Powersports & Mowers Aftermarket Parts Online on the Caltric Amazon store - www.amazon.com /caltric

Affiliate links / Images from Amazon Product Advertising API

FMF Powercore 4
The FMF Powercore 4 is a popular exhaust system for the Honda XR650L motorcycle. It’s made from high-quality materials and features a lightweight design that can improve the bike’s overall performance. The Powercore 4 also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.

Yoshimura RS-2
The Yoshimura RS-2 is another popular exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a cone-shaped end cap that can improve the bike’s overall performance. The RS-2 also has a unique sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.

Pro Circuit T-4
The Pro Circuit T-4 is a high-performance exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a lightweight design that can improve the bike’s overall performance. The T-4 also has a unique sound that many riders find appealing. It’s available in stainless steel or titanium, and comes with a spark arrestor for off-road use.

DG R-Series
The DG R-Series is a budget-friendly exhaust system for the Honda XR650L motorcycle. It’s made from high-quality stainless steel and features a lightweight design that can improve the bike’s overall performance. The R-Series also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or black finish, and comes with a spark arrestor for off-road use.

Lexx MXe Slip-On
The Lexx MXe Slip-On is a versatile exhaust system for the Honda XR650L motorcycle. It’s made from high-quality materials and features a lightweight design that can improve the bike’s overall performance. The MXe Slip-On also has a deep, throaty sound that many riders find appealing. It’s available in stainless steel or aluminum, and comes with a spark arrestor for off-road use.

What to look for in a good XR650L exhaust

Sound

Individual riders prefer various levels of sound for their exhaust system, and finding the right balance of sound and performance is key. Riders who want to remain courteous to those in the area tend to opt for a quieter exhaust system, while high-performance drivers may choose a louder system.

Consider local noise ordinances prior to selecting an exhaust system. Also, think about how you want your vehicle’s sound to affect passengers as you drive by and ask yourself if you would like it loud or barely perceptible. It accounts for half the enjoyment of competing – having people turn heads at your roar whilst staying legal with your local laws.

Performance

When selecting an exhaust system for your xr650l, there are a few important factors to consider. Performance is one of the most important considerations to make when choosing an exhaust. Exhaust systems increase engine output by reducing back pressure, allowing the gases in the cylinders to escape faster and with more force. This increases overall power and torque, improves fuel economy, and extends engine life.

Additionally, performance exhausts often result in a distinctive sound that amplifies the machine’s power and provides a unique experience when operating. Consider choosing an exhaust system that has been tested and proven by other riders as they often provide better performance than generic “universal fit” systems.

Durability

Durability is one of the most important factors when considering an exhaust system. A durable exhaust will last longer and provide better protection in off-road conditions. The material used is a major factor in the longevity of an exhaust system, and materials such as stainless steel or titanium are highly recommended. Therefore, it is important to check the materials and design of an exhaust system before making a purchase.

In addition to the materials used, the design can also play an important role in its durability. High-performance air systems tend to have smaller diameter pipes because this increases their internal velocity and helps reduce back pressure from the engine exhaust gases. However, these small diameter pipes can be easily bent or damaged during use in off-road conditions, so good construction should be taken into account when choosing an exhaust system for these purposes. Additionally, some designs may offer additional features such as heat shields or noise insulation that further increase durability and long-term performance of the system.

Weight

When choosing the best exhaust system for your XR650L, one of the primary factors to consider is weight. Many aftermarket exhaust systems are made of high-performance lightweight materials that allow for increased performance and better porting. Some materials are more expensive than others, but can perform better and last longer.

Additionally, some exhaust systems come with a different weight configuration – such as a lighter or heavier muffler – that can affect how much power you’re getting from your bike. It’s important to understand the weight difference between different models so you can make an informed decision about which is the best exhaust system for your XR650L.

Cost

The cost of an exhaust system is an important factor to consider when buying. As a general rule, prices range from around $100 to over $1000, depending on the make and quality of the exhaust system. Higher-end systems may offer improved performance, louder sound and greater durability, but they are also typically more expensive.

It is important to research the different options and read reviews to determine which model is best for your particular bike. When making your decision, strike a balance between quality and price. Consider how often you plan on using the exhaust system and if you have any special requirements, such as emission requirements or fuel economy demands.

Budgeting for an expensive exhaust system can be difficult, but doing thorough research beforehand can ensure that you get the best value for what you pay for.

Popular XR650L Exhaust Systems

SaleBestseller No. 1
Bestseller No. 2
Big Gun Exhaust/EVO R Series Full System/Compatible with Honda XR 600 (85-00) XR 650L (93-24)/ 09-1613
  • Hard anodized oval shaped aluminum muffler
  • TIG welded reinforced muffler bracket(s)
  • 304 stainless steel mid pipe / head pipe
  • Red powder coated stainless steel end tip
  • Lighter than stock exhaust system
SaleBestseller No. 3
Big Gun Exhaust 09-1612 Exhaust Pipe EVO R Slip On,1 Pack
  • Fits Honda XR 600 (85-00) XR 650L (93-17)
  • Hard Anodized oval Shaped aluminum Muffler
  • TIG welded reinforced Muffler bracket
  • 304 Stainless Steel mid pipe/head pipe
  • Red powder coated Stainless Steel end tip
Bestseller No. 4
Bestseller No. 5
SaleBestseller No. 6
Bestseller No. 7
Bestseller No. 8
Big Gun Exhaust EVO U Series Exhaust System
  • High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket
Bestseller No. 9
DG PERFORMANCE 051-4130 Sport Series Slip-On Exhaust
  • Designed for maximum torque and power across torque curve
  • Features a durable 16 gauge steel body with a lightweight aluminum rear end cap
  • Includes U.S.F.S. approved, removable screen-type spark arrestor; replacement spark arrestor sold separately
  • Bolts on to stock head pipe in minutes
Bestseller No. 10
Caltric Muffler Pipe Gasket Compatible with Honda Xr650L Xr-650L 1995-2009
  • Order Includes: 1 x Muffler Gasket
  • Compatible with Honda models: VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / VTX1800R 2002-2003 / VTX1800S 2002-2003 / VTX1800R1 2004-2007 / VTX1800R2 2004-2007 / VTX1800R3 2004-2007 / CX500C CX-500C Custom 1979-1982 / GL1200A Goldwing Aspencade 1986 / GL1200I Goldwing Interstate 1986 / GL1200L Goldwing Limited 1985 / GL1200SEI Goldwing SEI 1986 / GL1500 Goldwing 1500 1988-1989
  • Parts Numbers: 18392-MJ4-670 / 18392-449-000
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.
  • Visit the Largest Selection of Powersports & Mowers Aftermarket Parts Online on the Caltric Amazon store - www.amazon.com /caltric

Affiliate links / Images from Amazon Product Advertising API

When it comes to finding the best exhaust system for a XR650L, there are several options for riders to choose from. Each one offers a different level of performance, sound and looks.

There are many exhaust systems available for the Honda XR650L motorcycle, and choosing the right one can greatly impact the bike’s performance and sound. The FMF Powercore 4, Yoshimura RS-2, Pro Circuit T-4, DG R-Series, and Lexx MXe Slip-On are all popular options among XR650L owners. Whether you’re looking for a high-performance exhaust system or a budget-friendly option, there’s an exhaust system out there that can meet your needs. Just make sure to research and consult with a professional before making any changes to your bike.

Find the best XR650L exhaust systems on Amazon.